Compex Technologies NetPassage 15B User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Chapter 2 Getting Started
2.2 TCP/IP Configuration of the Computers
Compex NetPassage 15B is designed with a built-in DHCP server. You may manually
configure the TCP/IP settings of your computers, or simply configure them to
dynamically obtain IP address from the DHCP server. If you are not an expert user, you
are advised to configure your computers to dynamically obtain IP addresses from the
built-in DHCP server of NetPassage 15B.
Before proceeding, please take note of the following default settings of NetPassage 15B:
IP (LAN): 192.168.168.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
2.2.1 Configuring your Computer to Dynamically Obtain IP Address
To configure your computers to dynamically obtain IP address, gateway and DNS
information from NetPassage 15B, perform the following actions:
For Microsoft Windows 95/98/ME
1. Open the Control Panel from the Start menu
2. Double-click on the Network icon, the network configuration window shall be
displayed, as shown in Figure 2.2.1-1.
Please ensure that the
TCP/IP protocol is installed
and bind to the network
adapter.
Figure 2.2.1-1
Network Configuration
Window
3. Double-click on the TCP/IP that is bound to your network adapter, the TCP/IP
configuration window shall be displayed, as shown in Figure 2.2.1-2.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Comments to this Manuals

No comments